Company news

Raymond Mill much because of the noise

Raymond Mill much because of the noise
Raymond mill in the production process, the noise is too large is a common phenomenon in normal noise is inevitable, but if too much noise and vibration associated with large, you need to pay attention, is likely to Raymond abnormal ground conditions, in order for the smooth running Raymond, users need to understand its causes in order to remedy. Here's what Raymond Mill much noise reasons.
Raymond Mill Vibration: Vibration of the first to distinguish between the host or the fan vibration. If the host vibration, first by process of elimination to troubleshoot. 1, see bolt, tighten the bolts; 2, to check the feeding quantity, is not too small and the feed size, timely adjustments; 3, see the wear of the blade, the blade can cause serious wear and tear production is not from the materials; 4, check the roller mill grinding ring is not deformed, check the milling machine in this order too much noise in the operation must be safe operations, to guard against accidents.
If the fan vibration is very easy to solve, fan vibration for two main reasons, 1, to the foot of the bolts loose, by the vision to see, you can tighten the anchor bolts; 2, has some dust on the blades, or uneven wear, resulting in unbalanced driven rotating fan blades vibration, dust or replace this fan can be removed.