Jaw Crusher

Product description:

Jaw Crusher is ideally suitable for primary and secondary crushing. The largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
Working Principle:
 The main structure of the jaw crusher consists of body frame,eccentric shaft,big pulley,flywheel,movable jaw,cheek plate,toggle plate,toggle seat,top thread bolt,reset spring,fixed jaw and movable jaw,the toggle plate has a great role in insurance.This jaw crusher uses motor as its power. Through the motors wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

 

Features:

1.The deep crushing cavity increases the feeding capacity and output capacity;
2.High crushing ratio, homogeneous final product size;
3.Adjusting the discharge opening through gasket, more convenient¡¢the adjusting range is wide, it can meet different customers' requirement;
4.Lubricate system is safe and reliable, easy to change the spare parts;
5.Simple structure, easy maintenance; consumption cost is lower;
6.Energy-saving; for one set of crusher saving about 15%-30% and more than twice for the whole crushing system;
7.Adjustment of the discharge port range, to meet the requirements of the different users.
8.Little noise and dust.

 

Specification:

Model	Opening Size (mm)	Max. Feeding Size (mm)	Discharge Size(mm)	Capacity (t/h)	Power (kw)	Dimension (mm)
PE-250¡Á400	250¡Á400	200	20-50	5-20	15	1430¡Á1310¡Á1340
PE-400¡Á600	400 ¡Á600	350	40-100	15-60	30-37	1700¡Á1732¡Á1653
PE-500¡Á750	500¡Á750	425	50-100	40-110	45-55	2035¡Á1921¡Á2000
PE-600¡Á900	600 ¡Á900	480	65-160	90-180	55-75	2290¡Á2206¡Á2370
PE-750¡Á1060	750 ¡Á1060	630	80-140	110-320	90-110	2655¡Á2302¡Á3110
PE-900¡Á1200	900¡Á1200	750	95-180	220-450	132	3475¡Á2826¡Á3025
PE-1000¡Á1200	1000¡Á1200	850	95-190	230-500	132	3800¡Á3166¡Á3045
PE-1200¡Á1500	1200¡Á1500	1020	150-300	400-800	220	4930¡Á3148¡Á3703
PE-1500¡Á1800	1500¡Á1800	1200	220-350	450-1000	355	5630¡Á3210¡Á4120
PEX-150¡Á250	150¡Á250	125	10-40	1-3	5.5	896¡Á745¡Á935
PEX-150¡Á750	150¡Á750	125	18-48	5-16	15	1200¡Á1500¡Á1200
PEX-250¡Á750	250¡Á750	210	25-60	15-30	22-30	1667¡Á1545¡Á1020
PEX-250¡Á1000	250¡Á1000	210	25-60	15-50	30-37	1550¡Á1964¡Á1380
PEX-250¡Á1200	1200¡Á250	210	25-60	20-60	37-45	2192¡Á1900¡Á1950

Note: Shanghai Shunky reserves the right to change the products design and specification; any change shall not be advised additionally.

Contact Us: